Welcome!

Search results for 'cressi calibro white pink ds424030 8022983978710'

Set Ascending Direction
Page:
  1. 1
  2. 2

  1. Alkyd anti-rust mono-component undercoat, easy to apply, it has excellent covering power and can be used as a matt finish for interiors or as an intermediate coat for single-component cycles. It can be applied on old mono-component primers and finishes, sanded down, wooden surfaces and bare ferrous substrates.
    It must not be applied on inorganic galvanizers or galvanized sheets. Not suitable for continuous immersion.

  2. Alkyd anti-rust mono-component undercoat, easy to apply, it has excellent covering power and can be used as a matt finish for interiors or as an intermediate coat for single-component cycles. It can be applied on old mono-component primers and finishes, sanded down, wooden surfaces and bare ferrous substrates.
    It must not be applied on inorganic galvanizers or galvanized sheets. Not suitable for continuous immersion.

  3. Adherglass is a primer which is based on synthetic polymers. It is a one-pack primer providing good adhesion and suitable for use on gel coats, GRP and epoxies such as Epoway and Aquastop. Adherglass is quick-drying and is used principally as a primer for antifouling on GRP or on new or stripped gel coats. The surface does not require sanding to guarantee good adhesion, but must be thoroughly degreased.

  4. Modified two-pack epoxy primer suitable for boat-hulls but also recommended for topsides and superstructures. Adherpox has been formulated for all types of boat building materials (aluminium included). If several coats are applied, this primer provides good corrosion protection. Thanks to its high solids by volume Adherpox complies with VOC-regulations.A special feature of Adherpox is its extended recoating interval: 3 months when recoated with antifoulings and 6 months when recoated with an additional coat of Adherpox, without sanding.

  5. Modified two-pack epoxy primer suitable for boat-hulls but also recommended for topsides and superstructures. Adherpox has been formulated for all types of boat building materials (aluminium included). If several coats are applied, this primer provides good corrosion protection. Thanks to its high solids by volume Adherpox complies with VOC-regulations.A special feature of Adherpox is its extended recoating interval: 3 months when recoated with antifoulings and 6 months when recoated with an additional coat of Adherpox, without sanding.

  6. An elastic antifouling recommended for inflatable boats. This antifouling is highly effective and ideal for painting neoprene surfaces, rubber fabric, PVC and Hypalon. It has excellent flexibility and adhesion.

  7. Ablative antifouling that is the result of a formulistic evolution guaranteeing an adequate seasonal protection and a universal application on every type of vessel and support. In order to guarantee a good performance for the season, it is necessary to apply 2 coats of product. This antifouling is compatible with most undercoats such as Ticoprene and Unikote Pro. All colour are suitable for aluminium hulls.

  8. Ablative antifouling that is the result of a formulistic evolution guaranteeing an adequate seasonal protection and a universal application on every type of vessel and support. In order to guarantee a good performance for the season, it is necessary to apply 2 coats of product. This antifouling is compatible with most undercoats such as Ticoprene and Unikote Pro. All colour are suitable for aluminium hulls.

  9. High quality antifouling with shiny colours and high performances. With its hydrophilic nature, the special composition of biocides guarantees a seasonal protection against every fouling type. Easy to use, it guarantees good fluidity performances even when it is applied by roller or brush. Suitable in all colours for every type of support, including aluminum.

  10. High quality antifouling with shiny colours and high performances. With its hydrophilic nature, the special composition of biocides guarantees a seasonal protection against every fouling type. Easy to use, it guarantees good fluidity performances even when it is applied by roller or brush. Suitable in all colours for every type of support, including aluminum.

  11. Antifouling specifically formulated for the protection of propellers, shafts, stern-gear, flaps, etc. where highest adhesion and abrasion resistance is required. Cover: 7,5 smq./lt.

  12. Hard-matrix antifouling paint with high copper content to ensure excellent protection. Eurosprint is an antifouling suitable for antifouling protection in sea water, brackish water and fresh water. A hard antifouling, with good abrasion resistance, Eurosprint is recommended for sail boats and fast motor boats (also faster than 35 knots). Can be used for boats made of wood, steel or GRP. Only the white Eurosprint is suitable for aluminium boats.

  13. Hard-matrix antifouling paint with high copper content to ensure excellent protection. Eurosprint is an antifouling suitable for antifouling protection in sea water, brackish water and fresh water. A hard antifouling, with good abrasion resistance, Eurosprint is recommended for sail boats and fast motor boats (also faster than 35 knots). Can be used for boats made of wood, steel or GRP. Only the white Eurosprint is suitable for aluminium boats.

  14. Hard-matrix antifouling paint with high copper content to ensure excellent protection. Eurosprint is an antifouling suitable for antifouling protection in sea water, brackish water and fresh water. A hard antifouling, with good abrasion resistance, Eurosprint is recommended for sail boats and fast motor boats (also faster than 35 knots). Can be used for boats made of wood, steel or GRP. Only the white Eurosprint is suitable for aluminium boats.

  15. Hard-matrix antifouling paint with high copper content to ensure excellent protection. Eurosprint is an antifouling suitable for antifouling protection in sea water, brackish water and fresh water. A hard antifouling, with good abrasion resistance, Eurosprint is recommended for sail boats and fast motor boats (also faster than 35 knots). Can be used for boats made of wood, steel or GRP. Only the white Eurosprint is suitable for aluminium boats.

  16. Hard-matrix antifouling paint with high copper content to ensure excellent protection. Eurosprint is an antifouling suitable for antifouling protection in sea water, brackish water and fresh water. A hard antifouling, with good abrasion resistance, Eurosprint is recommended for sail boats and fast motor boats (also faster than 35 knots). Can be used for boats made of wood, steel or GRP. Only the white Eurosprint is suitable for aluminium boats.

  17. Hard-matrix antifouling paint with high copper content to ensure excellent protection. Eurosprint is an antifouling suitable for antifouling protection in sea water, brackish water and fresh water. A hard antifouling, with good abrasion resistance, Eurosprint is recommended for sail boats and fast motor boats (also faster than 35 knots). Can be used for boats made of wood, steel or GRP. Only the white Eurosprint is suitable for aluminium boats.

  18. Hard-matrix antifouling paint with high copper content to ensure excellent protection. Eurosprint is an antifouling suitable for antifouling protection in sea water, brackish water and fresh water. A hard antifouling, with good abrasion resistance, Eurosprint is recommended for sail boats and fast motor boats (also faster than 35 knots). Can be used for boats made of wood, steel or GRP. Only the white Eurosprint is suitable for aluminium boats.

Set Ascending Direction
Page:
  1. 1
  2. 2