Search results for 'bravo bst 300 12v 6130131 8007405908315'
Bravo 110
€ 44.50New generation of hand pump indicated for kites, boats, kayaks, all inflatablesOUT OF STOCK
Bravo GE BP with Manometer
€ 149.00Inflator with pressure selection capability through a special pressure gauge. Capacity 160 lt / minAutomatic stop at the selected pressure up to 1000 mbar (14.5 psi). Power supply 12V-20A. Complete with fittings for dinghies and kites and shoulder bag. Dimensions 190x100x130 mmBravo Turbo Max 12V
€ 269.00New 12V-45 / 60A inflator-deflator. Able to inflate maxi rafts in a few minutes. Flow rate lt / min 1000, max pressure 250 mbar (dinghy of 7 meters in 7 minutes). Equipped with 2 powerful motors mounted on an aluminum plate to dissipate heat. Power cable and tube each of 3 m. Dim. Mm. 310x190x180 h. Weight kg. 3.5Solar shower
€ 13.00Manufactured in special PVC to get hot water.
Complete with hose and hand shower.- Professional range of self-priming electric 12V and 24V pumps. Ideal for bilge and waste water on any type of boat. ON/OFF switch integrated into the water-proof cap. The –R versions are fitted with a 3 positions switch for the inversion of flow direction.
Slam Summer Sailing Base Set - Man
€ 511.02Pro Sailing Shoes + Active Tech Cargo Shorts + ActIve Sunblock T-Shirt + Deck Summer Light Short Jacket + Pro Short Finger Gloves + Cotton Cap + Duffle BagT-Sound USB Bluetooth Radio
€ 139.00Radio USB/Bluetooth
12V power supply.
Password is required for synchronisation with your devices (012345).
Dimensions: H108xW108xD96 mm.
Cut-out: Ø 76 x 80 mm.
Contains: 1 Bluetooth amplifier and remote control.
Supplied with U-shaped stand for fixing.DAB not included
Scubapro Hybrid Hooded Vest Men
€ 60.00The HYBRID HOODED VEST’s ultra-comfortable neoprene/nylon blend does a great job of protecting your torso and head, two critical areas for minimizing heat loss, providing comfort, warmth and protection where you need it most.
Plastic winch handle pocket
€ 12.00Plastic winch handle holder length 300 mm color whiteYamaha outboard kit 200-300HP
Manufactured in aluminium.- Two-pack, fast drying, high resistance epoxy filler designed for final profiling and small repairs. Can be applied up to a thickness of 1 cm with one single-pass. Epomast Rapido can be applied to any kind of substrate after the application of a suitable primer. Can be applied onto Epomast Pro or to suitable epoxy undercoats both on below and above waterline areas. For best results, prior to the application of a topcoat, a suitable barriercoat or undercoat are recommended. Easy to sand in a short time, both dry and wet conditions.
Alkyd anti-rust mono-component undercoat, easy to apply, it has excellent covering power and can be used as a matt finish for interiors or as an intermediate coat for single-component cycles. It can be applied on old mono-component primers and finishes, sanded down, wooden surfaces and bare ferrous substrates.
It must not be applied on inorganic galvanizers or galvanized sheets. Not suitable for continuous immersion.Veneziani Gel Prime White 2.5 lt
€ 49.00Alkyd anti-rust mono-component undercoat, easy to apply, it has excellent covering power and can be used as a matt finish for interiors or as an intermediate coat for single-component cycles. It can be applied on old mono-component primers and finishes, sanded down, wooden surfaces and bare ferrous substrates.
It must not be applied on inorganic galvanizers or galvanized sheets. Not suitable for continuous immersion.Alkyd anti-rust mono-component undercoat, easy to apply, it has excellent covering power and can be used as a matt finish for interiors or as an intermediate coat for single-component cycles. It can be applied on old mono-component primers and finishes, sanded down, wooden surfaces and bare ferrous substrates.
It must not be applied on inorganic galvanizers or galvanized sheets. Not suitable for continuous immersion.Alkyd anti-rust mono-component undercoat, easy to apply, it has excellent covering power and can be used as a matt finish for interiors or as an intermediate coat for single-component cycles. It can be applied on old mono-component primers and finishes, sanded down, wooden surfaces and bare ferrous substrates.
It must not be applied on inorganic galvanizers or galvanized sheets. Not suitable for continuous immersion.- Scubapro Conversion Kit , INT/DIN, 300B for MK2/MK25 first stage
- The OPC-1655 adapter cable is compatible with the IC-M25/M37E/M93D/M94DE portable VHFs for channel programming via the OPC-478UD interface (ex OPC-478UC)