Search results for 'bravo bst 300 12v 6130131 8007405908315'
Bravo 110
€ 44.50New generation of hand pump indicated for kites, boats, kayaks, all inflatablesOUT OF STOCK
Bravo GE BP with Manometer
€ 149.00Inflator with pressure selection capability through a special pressure gauge. Capacity 160 lt / minAutomatic stop at the selected pressure up to 1000 mbar (14.5 psi). Power supply 12V-20A. Complete with fittings for dinghies and kites and shoulder bag. Dimensions 190x100x130 mmBravo Turbo Max 12V
€ 269.00New 12V-45 / 60A inflator-deflator. Able to inflate maxi rafts in a few minutes. Flow rate lt / min 1000, max pressure 250 mbar (dinghy of 7 meters in 7 minutes). Equipped with 2 powerful motors mounted on an aluminum plate to dissipate heat. Power cable and tube each of 3 m. Dim. Mm. 310x190x180 h. Weight kg. 3.5Plastic winch handle pocket
€ 12.00Plastic winch handle holder length 300 mm color whiteYamaha outboard kit 200-300HP
Manufactured in aluminium.- Two-pack, fast drying, high resistance epoxy filler designed for final profiling and small repairs. Can be applied up to a thickness of 1 cm with one single-pass. Epomast Rapido can be applied to any kind of substrate after the application of a suitable primer. Can be applied onto Epomast Pro or to suitable epoxy undercoats both on below and above waterline areas. For best results, prior to the application of a topcoat, a suitable barriercoat or undercoat are recommended. Easy to sand in a short time, both dry and wet conditions.
Alkyd anti-rust mono-component undercoat, easy to apply, it has excellent covering power and can be used as a matt finish for interiors or as an intermediate coat for single-component cycles. It can be applied on old mono-component primers and finishes, sanded down, wooden surfaces and bare ferrous substrates.
It must not be applied on inorganic galvanizers or galvanized sheets. Not suitable for continuous immersion.Veneziani Gel Prime White 2.5 lt
€ 49.00Alkyd anti-rust mono-component undercoat, easy to apply, it has excellent covering power and can be used as a matt finish for interiors or as an intermediate coat for single-component cycles. It can be applied on old mono-component primers and finishes, sanded down, wooden surfaces and bare ferrous substrates.
It must not be applied on inorganic galvanizers or galvanized sheets. Not suitable for continuous immersion.Alkyd anti-rust mono-component undercoat, easy to apply, it has excellent covering power and can be used as a matt finish for interiors or as an intermediate coat for single-component cycles. It can be applied on old mono-component primers and finishes, sanded down, wooden surfaces and bare ferrous substrates.
It must not be applied on inorganic galvanizers or galvanized sheets. Not suitable for continuous immersion.Alkyd anti-rust mono-component undercoat, easy to apply, it has excellent covering power and can be used as a matt finish for interiors or as an intermediate coat for single-component cycles. It can be applied on old mono-component primers and finishes, sanded down, wooden surfaces and bare ferrous substrates.
It must not be applied on inorganic galvanizers or galvanized sheets. Not suitable for continuous immersion.- Scubapro Conversion Kit , INT/DIN, 300B for MK2/MK25 first stage
- The OPC-1655 adapter cable is compatible with the IC-M25/M37E/M93D/M94DE portable VHFs for channel programming via the OPC-478UD interface (ex OPC-478UC)
- Innovative water-based antifouling with a hard matrix that guarantees easy application, an optimal result and a smooth, sliding surface. It dries quickly and is designed to meet the stringent regulations regarding "VOC emissions". Ideal for salty and fresh water, for all boats and for all types of support, excluding aluminium. It meets IMO requirements (AFS/CONF/26) and contains active substances compliant with the BPR regulation (Regulation (EU) No. 528/2012).
- Innovative water-based antifouling with a hard matrix that guarantees easy application, an optimal result and a smooth, sliding surface. It dries quickly and is designed to meet the stringent regulations regarding "VOC emissions". Ideal for salty and fresh water, for all boats and for all types of support, excluding aluminium. It meets IMO requirements (AFS/CONF/26) and contains active substances compliant with the BPR regulation (Regulation (EU) No. 528/2012).
Jabsco hand pump for on-board toilet
Regular Price: € 119.00
€ 109.00
Original hand pump for "normal" and "comfort" on-board Jabsco toilets. Includes: bottom seal. Weight: 1.03 kg.Sikaflex 591 - 300ml
€ 13.90Sika one-component silane polymer (STP) based sealant. Sikaflex 591 was specially developed for the harsh outdoor maritime conditions and is therefore extremely weather resistant. Also suitable for indoor applications. With the sealant 591 Sika sets new ecological standards for the safety and health of users: the sealant is free of tin, phthalates, isocyanate, solvents and PVC and therefore has the lowest emissions of all sealants available for marine applications. Furthermore, Sikaflex 591 has a long color stability and can be painted effortlessly with standard marine paint systems. (New formula to replace Sika 291)Slam Sailing Jacket Dark Navy
€ 130.00Man mesh-lined sailing jacket, waterproof and breathable, with high visibility foldable hood.