P95 WOOD PROTECTOR is a concentrated, highly technological impregnation product for natural wood surfaces, particularly suitable for nautical teak and external furniture. Thanks to its practically invisible nanometric film, the product makes the surfaces water-repellent and gives oily dirt repellency, breathability and high weather resistance. The advantages are: long-lasting protection against humidity penetration, against the adhesion of dirt and against damage caused by weather and atmospheric agents. Easy to apply, it remains permanently active for up to one year (depending on the exposure of the surface to weathering, walking and washing).

TIPS
Before applying P95 WOOD PROTECTOR it is necessary to clean the surface with a specific detergent for teak and wait until it dries. In order to guarantee the best results, it is recommended to apply the product at temperatures above 5°C and on surfaces which are not excessively heated by the sun. 

USE MODE
The product must be applied on non-treated or sealed wooden surfaces. In the case of wood which has been treated normally with waxes or varnishes, sand before applying P95. The product must be applied with a brush, roller or spray (avoid the formation of thin aerosols). Apply one abundant coat of product. The average consumption on flat surfaces (wooden floors or furnishing surfaces) is 1.5 L of P95 per 10 m2 of surface.
With this dosage a very long-lasting protection can be obtained, up to 3 years. Lower dosages will lead to a significant reduction in protection time.
FOR PROFESSIONAL USE ONLY.
The product maintains its characteristics when correctly stored in unopened containers, away from light and heat sources, in a cool, dry place, at a temperature between 5°C and 35°C.